Serial interface

From: MANU mohan (cciemanu@rediffmail.com)
Date: Mon Apr 12 2004 - 12:12:13 GMT-3

• Next message: Richard Dumoulin: "Frame relay"
• Previous message: Richard Dumoulin: "RE: advertise ospf as 192.168.1.1 /29 0.0.0.0 area 0 and"
• Next in thread: Fernando Rodriguez: "Re: Serial interface"
• Maybe reply: Fernando Rodriguez: "Re: Serial interface"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

  
Hai,
   I have a problem with my serial interfaces.I have connected two
2500 series routers using back-to-back serial cables.I have configured ip
addresses ,clock rate at DCE interface and same encapsulation type.When I gave
the show interface serial command the interface and the line protocol is up
and DSR,DTR,RTS,CTS,DCD are all up.But I am not getting the connectivity.Why
?When I removed the cable and put in another slot it works.So what will be the
problem with the first case ?
MANU

• Next message: Richard Dumoulin: "Frame relay"
• Previous message: Richard Dumoulin: "RE: advertise ospf as 192.168.1.1 /29 0.0.0.0 area 0 and"
• Next in thread: Fernando Rodriguez: "Re: Serial interface"
• Maybe reply: Fernando Rodriguez: "Re: Serial interface"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:46 GMT-3