From: Snow, Tim (timothy.snow@eds.com)
Date: Mon Apr 12 2004 - 07:59:39 GMT-3
The drawing did not come out very clear.
Could you post configs so we can see what you are trying to explain?
Thanks.
Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ume2tsu@yahoo.co.jp
Sent: Monday, April 12, 2004 4:05 AM
To: ccielab@groupstudy.com
Subject: NAT Translation question 2
Dear all:
When I use a 'show ip nat translations' in Cisco2611XM,
what nat address translation can I see ?
192.168.1.61 & 62 or 192.168.0.61 & 62 ? which address ?
Please let me know.
Please answer my basic question.
| |---[PC1]192.168.1.61
WAN----[Cisco2611XM]---+-[F/W]---+
| |---[PC2]192.168.1.62
192.168.0.0/24 192.168.1.0/24
In Cisco2611XM, I use dynamic nat addresss.
Dynamic nat address is 10.1.1.1-2
In F/W,I use static nat address.
Static nat address is 192.168.1.61<->192.168.0.61
Static address is 192.168.1.62<->192.168.0.62
When I use a 'show ip arp' in Cisco2611XM,
what address can I see ? I think I can see 192.168.0.61 &
62. Is it correct ?
I tried to ping from Cisco2611XM to 192.168.0.61 & 62
and 192.168.1.61 & 62 but there were no answer. Why ? Is
it due to F/W ?
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:46 GMT-3