NAT Translation question

From: ume2tsu@yahoo.co.jp
Date: Mon Apr 12 2004 - 04:57:27 GMT-3

• Next message: ume2tsu@yahoo.co.jp: "NAT Translation question 2"
• Previous message: Richard Dumoulin: "RE: advertise ospf as 192.168.1.1 /29 0.0.0.0 area 0 and"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Dear all:

Please answer my basic question.

                       | |---[PC1]192.168.1.61
WAN----[Cisco2611XM]---+-[F/W]---+
                       | |---[PC2]192.168.1.62
         192.168.0.0/24 192.168.1.0/24

In Cisco2611XM, I use dynamic nat addresss.
Dynamic nat address is 10.1.1.1-2

In F/W,I use static nat address.
Static nat address is 192.168.1.61<->192.168.0.61
Static address is 192.168.1.62<->192.168.0.62

When I use a 'show ip arp' in Cisco2611XM,
what address can I see ? I think I can see 192.168.0.61 &
62. Is it correct ?
I tried to ping from Cisco2611XM to 192.168.0.61 & 62
and 192.168.1.61 & 62 but there were no answer. Why ? Is
it due to F/W ?

• Next message: ume2tsu@yahoo.co.jp: "NAT Translation question 2"
• Previous message: Richard Dumoulin: "RE: advertise ospf as 192.168.1.1 /29 0.0.0.0 area 0 and"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:46 GMT-3