From: Serran (groupstudy@swiftdsl.com.au)
Date: Sun Apr 11 2004 - 10:49:03 GMT-3
apart from what Scott and Richard have mentioned.. there is also the
implication of using 0.0.0.0 on an asbr interfacing the ospf network, in
which any routes redistributed into ospf will have a fwding address of
0.0.0.0
www.cisco.com/warp/public/104/10.html
cheers
Serran
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Allan Wells
Sent: Sunday, 11 April 2004 8:34 PM
To: ccielab@groupstudy.com
Subject: advertise ospf as 192.168.1.1 /29 0.0.0.0 area 0 and not
0.0.0.7
Hi,
I have been doing some labs and looking at all the solutions.
Why is it some labs setup OSPF to use wildcard mask 0.0.0.0 with say /29
multipoint hub and spoke network
As apposed to to using 0.0.0.7 mask also I tried this config with eigrp and
theirs no problem their either what is the better way and why.
I always was under the impression we need to advertise the mask of the
network in the above example 0.0.0.7 obviously not.
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:46 GMT-3