From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Apr 09 2004 - 18:58:28 GMT-3
Shut the interface S0 down on R4 and repaste the sh ip int brief.
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> ccie2002@bellsouth.net
> Sent: Friday, April 09, 2004 3:54 PM
> To: Brian McGahan; ccielab@groupstudy.com
> Subject: Re: RE: Internetworkexpert Lab 2
>
> All thank for responding..So many good ideas.
>
> Below is the info you requested..
>
>
> Router 3 below
>
> ^
>
> Cisco2502_R3#show ip int brief
> Interface IP-Address OK? Method Status
> Prol
> Async1 132.1.23.3 YES NVRAM up
> up
> Loopback0 150.1.3.3 YES NVRAM up
> up
> Loopback1 132.1.33.3 YES NVRAM up
> up
> Serial0 132.1.0.3 YES NVRAM up
> up
> Serial1 unassigned YES NVRAM up
> up
> Serial1.1 132.1.35.3 YES manual up
> up
> TokenRing0 132.1.3.3 YES NVRAM up
> up
> Cisco2502_R3#
>
>
>
> router 4 below
>
>
>
> Cisco2504_R4#show ip int brief
> Interface IP-Address OK? Method Status
> Prol
> BRI0 132.1.45.4 YES NVRAM up
> up
> BRI0:1 unassigned YES unset down
> dow
> BRI0:2 unassigned YES unset down
> dow
> Loopback0 150.1.4.4 YES NVRAM up
> up
> Serial0 132.1.0.4 YES NVRAM up
> up
> Serial1 unassigned YES NVRAM administratively
> down dow
> TokenRing0 unassigned YES NVRAM administratively
> down dow
> Virtual-Access1 unassigned YES TFTP down
> dow
> Cisco2504_R4#
>
> Route 5 below
>
>
>
> Cisco2503_R5#show ip int brief
> Interface IP-Address OK? Method Status
> Prol
> BRI0 132.1.45.5 YES NVRAM standby mode
> dow
> BRI0:1 unassigned YES unset administratively
> down dow
> BRI0:2 unassigned YES unset administratively
> down dow
> Ethernet0 192.10.1.5 YES NVRAM up
> up
> Loopback0 150.1.5.5 YES NVRAM up
> up
> Loopback1 132.1.5.5 YES NVRAM up
> up
> Serial0 unassigned YES TFTP up
> up
> Serial0.1 132.1.35.5 YES manual up
> up
> Serial1 unassigned YES TFTP administratively
> down dow
> Virtual-Access1 unassigned YES TFTP down
> dow
> Cisco2503_R5#
>
>
>
>
> >
> > From: "Brian McGahan" <bmcgahan@internetworkexpert.com>
> > Date: 2004/04/09 Fri AM 10:54:04 EDT
> > To: <ccie2002@bellsouth.net>, <ccielab@groupstudy.com>
> > Subject: RE: Internetworkexpert Lab 2
> >
> > What is the line protocol status of the subinterface where the
> > "backup interface" command is configured? Unless the line protocol
is
> > down the interface in standby mode will remain so. Paste a "show ip
int
> > brief" from R3, R4, and R5.
> >
> >
> > HTH,
> >
> > Brian McGahan, CCIE #8593
> > bmcgahan@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987 x 705
> > Outside US: 775-826-4344 x 705
> >
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
Behalf
> > Of
> > > ccie2002@bellsouth.net
> > > Sent: Thursday, April 08, 2004 9:37 PM
> > > To: ccielab@groupstudy.com
> > > Subject: Internetworkexpert Lab 2
> > >
> > > All:
> > >
> > > I am working on the internetwork lab and I am having problems
> > > with my isdn. The goal is go have the frame relay go down. Once
> > > the frame relay goes down, the isdn should kick in with
> > > PPP callback. The isdn is a backup interface. To try to
> > > jump start the isdn, I went to the remote side and downed
> > > the frame relay link. However, my isdn would not kick in.
> > > Any suggestions on why it is not working.
> > >
> > > ****************************** Router 5 *********************
> > >
> > > Cisco2503_R5#show isdn status
> > > Global ISDN Switchtype = basic-ni
> > > ISDN BRI0 interface
> > > dsl 0, interface ISDN Switchtype = basic-ni
> > > Layer 1 Status:
> > > DEACTIVATED
> > > Layer 2 Status:
> > > Layer 2 NOT Activated
> > > TEI Not Assigned, ces = 1, state = 3(await establishment)
> > > spid1 configured, spid1 NOT sent, spid1 NOT valid
> > > Layer 3 Status:
> > > 0 Active Layer 3 Call(s)
> > > Active dsl 0 CCBs = 0
> > > The Free Channel Mask: 0x00000000
> > > --More--
> > >
> > >
> > >
> > > username ROUTER4 password 0 cisco
> > >
> > > interface BRI0
> > > description port B s1 40822222221 s2 40822222222
> > > ip address 132.1.45.5 255.255.255.248
> > > ip router isis
> > > encapsulation ppp
> > > dialer map clns 49.0035.0006.0006.00 name ROUTER4 broadcast
> > 4082222222
> > > dialer map ip 132.1.45.4 name ROUTER4 broadcast 4082222222
> > > dialer-group 1
> > > isdn switch-type basic-ni
> > > isdn spid1 40811111111 4081111111
> > > ppp callback request
> > > ppp authentication chap callout
> > > ppp chap hostname ROUTER5
> > > ppp multilink
> > > isis circuit-type level-2-only
> > > end
> > >
> > >
> > >
> > >
> > > Cisco2503_R5#
> > > Cisco2503_R5#sh run int s0.1
> > > Building configuration...
> > >
> > > Current configuration : 186 bytes
> > > !
> > > interface Serial0.1 point-to-point
> > > backup interface BRI0
> > > ip address 132.1.35.5 255.255.255.0
> > > ip router isis
> > > frame-relay interface-dlci 513
> > > isis circuit-type level-2-only
> > > end
> > >
> > > Cisco2503_R5#
> > >
> > >
> > >
> > > **************************** Router 4 configs below
> > **********************
> > > username ROUTER5 password 0 cisco
> > >
> > >
> > >
> > >
> > > interface BRI0
> > > description port A s1 40811111111 s2 40811111112
> > > ip address 132.1.45.4 255.255.255.248
> > > ip router isis
> > > encapsulation ppp
> > > dialer idle-timeout 0
> > > dialer map clns 49.0035.0005.0005.00 name ROUTER5 broadcast
> > 4081111111
> > > dialer map ip 132.1.45.5 name ROUTER5 class CALLBACK 4081111111
> > > dialer-group 1
> > > isdn switch-type basic-ni
> > > isdn spid1 40822222222 4082222222
> > > cdapi buffers regular 0
> > > cdapi buffers raw 0
> > > cdapi buffers large 0
> > > ppp callback accept
> > > ppp authentication chap callin
> > > ppp chap hostname ROUTER4
> > > ppp multilink
> > >
> > >
> > >
> > > dialer-list 1 protocol ip permit
> > >
> > >
> > > map-class dialer CALLBACK
> > > dialer callback-server username
> > >
> > >
> >
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:44 GMT-3