From: sustundag@secura.com.tr
Date: Wed Apr 07 2004 - 09:30:19 GMT-3
Hi Group
I read that:
AutoInstall using Frame Relay can be initiated over only the first serial
interface on the new router.
Specifically, Autoinstall over Frame Relay can be initiated over Serial 0
(S0), or Serial 1/0 (S1/0). For
example, if the new router has serial interfaces S1/0 through S1/3 and S4/0
through S4/3, AutoInstall
will be attempted over S1/0 only and cannot be forced to be initiated from
S4/0. If AutoInstall over S1/0
fails, an Frame Relay attempt will not be made from any other serial port.
It looked to me nonsense.No alternative usage ?
Any info will be appreciated
Thanks in advance.
Serkan Ustundag
Network and Security Engineer
CCNP,CCDP,CCSE
CCSP (Cisco Certified Security Professional)
Cisco Network Management Specialist
sustundag@secura.com.tr <mailto:sustundag@secura.com.tr>
Secura bir TEPUM grup sirketidir
Cisco Systems IP Communications Partner of the Year, 2004, Turkey
Cisco Systems Security Partner of the Year, 2004, Turkey
Cisco Systems AVVID Partner of the Year, 2003, EMEA (Europe, Middle East and
Africa)
Cisco Systems Solution Partner of the Year, 2002, Turkey
Gazeteciler Mahallesi, Haberler Sokak
No:8 34394 Esentepe Istanbul
Direkt : +90 212 3550640
Santral: +90 212 3550600
Faks : +90 212 2757115
www.secura.com.tr <http://www.secura.com.tr/>
www.tepum.com.tr
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:44 GMT-3