From: Moffat, Ed (EMoffat@fsci.com)
Date: Sat Apr 03 2004 - 18:34:48 GMT-3
Have you checked the configurations and errors on your DSUs?
-----Original Message-----
From: Kaiser Anwar [mailto:kaiseranwar@sbcglobal.net]
Sent: Saturday, April 03, 2004 1:30 PM
To: 'Neil Moore'; 'Ccielab@Groupstudy. Com (E-mail)'
Subject: RE: line protocol is down
It is simply point to point with ser up on both sides and line down. I have
tried every combination. On one side I am getting lot of input errors. As
soon as I clear them I get them again. Thanks
Kaiser Anwar
Network engineer
Cell: (847) 409-7261
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Neil Moore
Sent: Saturday, April 03, 2004 3:19 PM
To: Kaiser Anwar; Ccielab@Groupstudy. Com (E-mail)
Subject: Re: line protocol is down
The physical interface being down, Incorret DLCI on the frameswitch or
interface would do it.
Please email in the physical and point-to-p conifg along with a show frame
map
----- Original Message -----
From: "Kaiser Anwar" <kaiseranwar@sbcglobal.net>
To: "Ccielab@Groupstudy. Com (E-mail)" <ccielab@groupstudy.com>
Sent: Saturday, April 03, 2004 4:05 PM
Subject: line protocol is down
> Hi,
> Just a quick question for point to point what could cause line
> protocol down. Thanks
>
>
> Kaiser Anwar
> Network engineer
> Cell: (847) 409-7261
>
> ______________________________________________________________________
> _ Please help support GroupStudy by purchasing your study materials
> from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:43 GMT-3