From: Sam (samccie2004@yahoo.co.uk)
Date: Mon Apr 05 2004 - 05:50:16 GMT-3
U set the corresponding username + password on the remote router on global
mode.
R4
Bri0
ppp pap sent etc...R4
****************************************
R5 would expect ur password when u do
R5
username R4 password CISCO
****************************************
CISCO is different from cisco !
Cheers
Sam
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Lee Donald
Sent: 05 April 2004 10:36
To: ccielab@groupstudy.com
Subject: ISDN Pap problem IE lab 1
I'm trying IE lab 1 and at the weekend I could not get the ISDN to work, it
failed on authentication. I'm only using PAP.
This is Legacy DDR.
The command to send your logon details was "ppp pap sent-username R5
password
cisco", but where is the incoming username & password set ? I couldn't find
it
?
Thanks for any help.
-----------------------------------------------------
You can find us at www.bacs.co.uk
*****************************************************
This communication is confidential and intended for
the exclusive use of the addressee only. You should
not disclose its contents to any other person.
If you are not the intended recipient please notify
the sender named above immediately.
BACS Limited, registered in England, No 1023742,
3 De Havilland Road, Edgware, Middlesex, HA8 5QA
*****************************************************
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:42 GMT-3