From: Gene Thorne (gthorne@wamnetgov.com)
Date: Wed Mar 31 2004 - 08:15:57 GMT-3
RE: compound frame switchthanks, missed that one
-----Original Message-----
From: Richard Dumoulin [mailto:richard.dumoulin@vanco.es]
Sent: Wednesday, March 31, 2004 5:14 AM
To: Gene Thorne; ccielab@groupstudy.com
Subject: RE: compound frame switch
Gene, you need the following frame feature: "frame relay tunnel
switching". Look in the feature navigator
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Regards
--Richard
-----Mensaje original-----
De: Gene Thorne [mailto:gthorne@wamnetgov.com]
Enviado el: miircoles, 31 de marzo de 2004 11:59
Para: ccielab@groupstudy.com
Asunto: compound frame switch
I am attempting to build a compound frame switch based on the configs in
the
Internetwork Expert whitepaper.
<http://www.internetworkexpert.com/resources/compound.frame-relay.htm> I
am
using a 2521 and a 4000M instead of two 2500s. The tunnel interfaces are
up,
can ping ok, etc. But on the 4000, I cannot use the tunnel as a
destination
interface on the "frame-relay route" interface command. Which IOS--if
any--will allow that option on the 4000M? I currently am running 12.1(21)
IP
Plus.
-Thanks,
Gene
_______________________________________________________________________
Please help support GroupStudy by purchasing your study materials from:
http://shop.groupstudy.com
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:50 GMT-3