From: Scott Morris (swm@emanon.com)
Date: Wed Mar 31 2004 - 01:14:17 GMT-3
The CCM install isn't THAT picky.. The installation engine checks for a few
"pre-existing" things, drivers and reg-keys. As far as I have seen, the CPU
speed is not one of those things checked. My DL320's are the 1133 variety
though, so I have not absolutely tested that out!
But all of the docs for running on a "non-standard" device have no mention
of restrictions on CPU speed or bus speeds, so shouldn't be any problem.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, CISSP,
JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Reyero, Mark G (EM, ITS)
Sent: Tuesday, March 30, 2004 10:59 PM
To: ccielab@groupstudy.com
Subject: OT: CallMananger / DL320 Question
Groupstudy Folks;
I found the Cisco approved list of DL320 for CallManager. The list includes
the 800Mhz, 1133Mhz, 2.26Ghz, 3.06Ghz and models of the DL320
Curiously, it did not include the DL320-G2 P4 2.66Ghz, P/N 322544-002.
Link:
http://www.cisco.com/en/US/products/hw/voiceapp/ps378/prod_brochure09186a008
0
107d79.html
My questions:
1. Does anyone know if CCM can be installed on the above mentioned? My
assumption is yes, but we all know a CCM install is touchy.
2. If yes, has anyone actually tested it in either a lab or production
environment?
Thanks in advance!
Mark G. Reyero, CCIE #12932
Network Consulting Engineer
GE IT Solutions
Office: 866-836-4044
Cell: 443-956-6076
Fax: 410-295-7217
Email: mark.reyero@ge.com
Web: www.geitsolutions.com <http://www.geitsolutions.com/>
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:50 GMT-3