From: Calton, Doug (Doug.Calton@getronics.com)
Date: Tue Mar 30 2004 - 14:56:36 GMT-3
I suspect VRRP is a more appropriate answer if you are running 12.3 or
the appropriate 12.2 T release. IRDP is viable, but it seems
presumptuous for a problem to assume the workstations are config'd for
it IMO.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
micsoniu@telus.net
Sent: Tuesday, March 30, 2004 12:36 PM
To: ccielab@groupstudy.com
Subject: IRDP ???
Default gateway problem:
Two routers R1 and R2 are attached to the same LAN. R1 provides dynamic
IP
addressing to workstations locatde on this LAN. R2 will be the default
gateway
but if R2 is not reachable, R1 will become the gateway for the machines
that
already acquired IP addresses. NO HSRP IS ALLOWED !
1. Is IRDP the appropriate solution ? - Configure R1 and R2 to advertise
R2's
IP address using different IRDP piorities ? ( let's say 100 for R2 and
50 for
R1)...
2. If IRDP is the right solution, how do we know that IRDP is enabled on
workstations ?
3. If this is not the right solution, any suggestions would be
appreciated ...
Thank you
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:49 GMT-3