From: Kian Wah Lai (kian_wah_lai@az5.net)
Date: Sun Mar 21 2004 - 03:15:46 GMT-3
Hi,
I have no idea how to do the 3rd part (no idea how to advertise the route).
I got this from Cisco ASET lab 3 and attached is the diagram.
Configure NAT:
. Configure NAT on R2 such that inside hosts leaving VLAN 2 toward the Frame
Relay cloud will be given
an outside IP address in the range 170.100.59.2 through 170.100.59.4 with a
29-bit netmask. Use list
number 20 for this task.
. Make sure that all possible hosts within the VLAN 2 subnet could be
supported by this NAT
implementation.
. Ensure that the other routers see the VLAN 2 170.100.20.x route as well as
the 170.100.59.0/24
network.
. You may not create a loopback interface or a static route to perform any
NAT tasks.
Regards,
Kian Wah Lai
[GroupStudy removed an attachment of type image/jpeg which had a name of R&S Lab Guide3.jpg]
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:42 GMT-3