From: Packet Man (ccie2b@hotmail.com)
Date: Sat Mar 20 2004 - 12:51:20 GMT-3
Hey Ato,
I had tried clearing the ospf process but that didn't work. I didn't clear
the Eigrp process because I didn't know that I could but I'll give that a
try as well.
I don't know but I suspect that the unequal cost parallel links between R2
and R3 might somehow be at the root of this problem, but I can't figure out
how or what to do about that.
>From: "SANCHEZ-MONGE,ANTONIO (HP-France,ex2)"
><antonio.sanchez-monge@hp.com>
>Reply-To: "SANCHEZ-MONGE,ANTONIO (HP-France,ex2)"
><antonio.sanchez-monge@hp.com>
>To: "'Packet Man'" <ccie2b@hotmail.com>, ccielab@groupstudy.com
>Subject: RE: redist ospf==>Eigrp
>Date: Sat, 20 Mar 2004 16:39:31 +0100
>
>Hi,
>
>If the EIGRP and OSPF adjacencies are OK, the only thing I can think of is
>to clear EIGRP adjacencies and OSPF process, eventually reboot.
>
>Sorry I am out of ideas ;)
>
>Cheers,
>Ato.
>
>-----Original Message-----
>From: Packet Man [mailto:ccie2b@hotmail.com]
>Sent: sabado, 20 de marzo de 2004 16:34
>To: antonio.sanchez-monge@hp.com; ccielab@groupstudy.com
>Subject: RE: redist ospf==>Eigrp
>
>
>Ato,
>
>As it happens, I tried that also. Actually, it was the first thing I
>tried.
>
> Went to what you see below when that didn't work.
>
>
> >From: "SANCHEZ-MONGE,ANTONIO (HP-France,ex2)"
> ><antonio.sanchez-monge@hp.com>
> >To: 'Packet Man' <ccie2b@hotmail.com>, ccielab@groupstudy.com
> >Subject: RE: redist ospf==>Eigrp
> >Date: Sat, 20 Mar 2004 16:26:51 +0100
> >
> >Hi,
> >
> >Under the eigrp process, I suggest to try:
> >
> >redist ospf 1 metric 1000 100 255 1 1500
> >
> >Cheers,
> >Ato.
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> >Packet Man
> >Sent: sabado, 20 de marzo de 2004 16:13
> >To: ccielab@groupstudy.com
> >Subject: redist ospf==>Eigrp
> >
> >
> >Hi guys,
> >
> >Here's another redist problem that I can't figure out. It seems so
> >simple and yet it's so hard.
> >
> >
> >Topology:
> >
> >R1 area 0 R2 Eigrp 23 R3
> > \ /
> > \ /
> > \ /
> >
> > R4
> >
> >
> >R2 has 2 links to R3, 1 is Ethernet and 2nd link is Fast Ethernet and
> >both links are running Eigrp.
> >
> >
> >Mutual redist is config on R2.
> >
> >R2's config:
> >
> >router ospf 1
> >redist eigrp 23 subnet
> >net x.x.x.x w.w.w.w area 0
> >
> >router eigrp 23
> >redist ospf 1
> >default-metric 1000 100 255 1 1500
> >
> >All Eigrp routes are showing up on R4 and R1, but no OSPF routes are
> >showing
> >
> >up on R3.
> >
> >So, why don't any ospf routes show up on R3?
> >
> >Thanks in advanced. pm
> >
> >_________________________________________________________________
> >Find a broadband plan that fits. Great local deals on high-speed
> >Internet access.
> >http://click.atdmt.com/AVE/go/onm00200360ave/direct/01/
> >
> >_______________________________________________________________________
> >Please help support GroupStudy by purchasing your study materials from:
> >http://shop.groupstudy.com
> >
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
>_________________________________________________________________
>Get reliable access on MSN 9 Dial-up. 3 months for the price of 1!
>(Limited-time offer)
>http://click.atdmt.com/AVE/go/onm00200361ave/direct/01/
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:41 GMT-3