From: Kenneth Wygand (KWygand@customonline.com)
Date: Fri Mar 19 2004 - 12:28:00 GMT-3
Also add "no exec" under async lines....
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"The only unattainable goal is the one not attempted."
-Anonymous
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nick Payton
Sent: Monday, March 15, 2004 7:43 PM
To: 'Gary Braver'; ccielab@groupstudy.com
Subject: RE: 2509 access server config
Gary,
Did you try adding "flowcontrol none" under the asynch lines? Not
sure
what the default is here, but I had a similar problem and when I added
none
everything came back to life for me. Worth a try.
http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note0
9186
a00800941ab.shtml
Regards,
Nick
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Gary
Braver
Sent: Monday, March 15, 2004 11:04 AM
To: 'Jonathan Hays'; ccielab@groupstudy.com
Subject: RE: 2509 access server config
Thanks for the suggestiongs - Have tried them all.
Will try downgrading sw to 11.1 (same as I have on the other working
2509) and see if it works.
If not will just keep on using the telnet command.
gary
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jonathan Hays
Sent: Monday, March 15, 2004 1:47 PM
To: ccielab@groupstudy.com
Subject: RE: 2509 access server config
That'll do it, all right. When I remove 'no ip domain-lookup' it tries a
DNS
lookup, but after a bit it finds the local host name and connects via
reverse telnet. See below:
t-serv#r2521
Translating "r2521"...domain server (255.255.255.255)
(255.255.255.255)Trying r2521 (1.3.5.7, 2001)... Open
r4#
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Richard Dumoulin
>Sent: Monday, March 15, 2004 1:26 PM
>To: Gary Braver; ccielab@groupstudy.com
>Subject: RE: 2509 access server config
>
>
>"no ip domain-lookup" ?
>
>-----Mensaje original-----
>De: Gary Braver [mailto:gbraver@comcast.net] Enviado el: lunes, 15 de
>marzo de 2004 19:05
>Para: ccielab@groupstudy.com
>Asunto: 2509 access server config
>
>
>stumped about this one.
>
>trying to use a 2509 for reverse access to my home lab systems.
>
>had a config on another 2509 that worked (with 11.1). loaded it into
>the new 2509 running 11.3t and it does not work. every time I try to
>type r1 (with r1 being ip host r1 2001 1.1.1.1) it gives me
>unrecognized input also notice when i loaded the config the hostnames
>are now in a different location in the config.
>am i brain dead and missing something basic
>
>thanks
>
>
>
>this is the 11.1 config
>service udp-small-servers
>service tcp-small-servers
>!
>hostname AccessServer
>!
>!
>no ip domain-lookup
>!
>interface Loopback0
> ip address 1.1.1.1 255.255.255.0
>!
>interface Ethernet0
> ip address 204.179.8.61 255.255.255.0
>!
>interface Serial0
> no ip address
> no fair-queue
>!
>interface Serial1
> no ip address
> shutdown
>!
>ip default-gateway 204.179.8.33
>ip host r1 2001 1.1.1.1
>ip host r2 2002 1.1.1.1
>ip host r3 2003 1.1.1.1
>ip host r4 2004 1.1.1.1
>ip host r5 2005 1.1.1.1
>no ip classless
>ip route 0.0.0.0 0.0.0.0 204.179.8.33
>!
>line con 0
> exec-timeout 0 0
>line 1 8
> exec-timeout 0 0
> transport preferred none
> transport input all
>line aux 0
>line vty 0 4
> exec-timeout 0 0
> password cisco
> login
>!
>end
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:37 GMT-3