From: Ahmed Mustafa (ahmed.mustafa@sbcglobal.net)
Date: Fri Mar 19 2004 - 04:14:05 GMT-3
Group,
Can someone explain the following:
Task 9.3 clearly says CIR is 256000
Task 9.5 states Burst up to its port speed. Bc: Wouldn't we simply use
512000 for Bc instead of calculating through the formula: BC=CIR * Tc/1000
The solution guide states
AR (port speed) = 512000 bps -------> agreed
CIR (average rate) = 384000bps -------------> if task clear says that CIR
25600, then how to identify the correct CIR value. The task 9.4 states R1
should send data at 384000.
Solution guide has also defined the Be eventhough is not asked to configured.
Regards,
Ahmed
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:35 GMT-3