RE: 3COM Question

From: Kenneth Wygand (KWygand@customonline.com)
Date: Thu Mar 18 2004 - 22:42:20 GMT-3


Jerry & Sam,
 
Yes I've heard this before too. You should definitely take a look at that as well.
 
Ken

        -----Original Message-----
        From: nobody@groupstudy.com on behalf of phase90
        Sent: Thu 3/18/2004 8:13 PM
        To: Sam Joseph; ccielab@groupstudy.com
        Cc:
        Subject: Re: 3COM Question
        
        

        Sam,
        
                       Is it single-mode fiber runs? If it is, it could be the
        attenuation on the fiber is not
        enough and the TX on port 1 on your Sw 1 is burning out the RX on your Sw 2.
        This happened to my network 1 time when someone ran a single-mode fiber for
        on a 1 meter jumper in between a router
        and a Lightstream 1010. This is way out of spec and yet it ran fine for over
        2 years until the PAM on
        the LS1010 couldn't take it anymore and just burnt out. Worth a look.
        
        
        Jerry
        
        
        ----- Original Message -----
        From: "Sam Joseph" <samjoseph747@hotmail.com>
        To: <ccielab@groupstudy.com>
        Sent: Thursday, March 18, 2004 7:26 PM
        Subject: 3COM Question
        
        
> Hi Group,
>
> Wanted to throw in this and let me know, what you Cisco Experts think
        about
> this.
>
> At my work, We have 3COM 9300 ( 12 port Fiber) switch. This Sw has Layer 3
> capabilities. Upart from Default Vlan we created one more VLAN. Thats all.
> No inter VLAN communication. We exhausted all 12 ports on Present Sw.
>
> We went ahead and bought another 3COM 9300 Sw. When Hooked the second
> switch, it was hooked as a cascading chain. Port 1 from Sw1 Connected to
> Port 1 of Sw2 with Fiber Cross Over cable.
>
> It worked for some time. May be 6 --- 8 Months. Then the Port1 on Sw2
> Failed. We thought Port1 went bad on Sw2. We moved it to Port2. After a
> Month Port2 on Sw2 Failed. We moved it to Port3 now. It has been working
> Okay since then.
>
> This Morning, Port4 on Sw2 failed. We moved it to Port5 on Sw2.
>
> Is this a symptom of switch2 going bad one port at a time?. or there is a
> missing Link.
>
> Your Earliest Response will be Appreciated.
>
> ---Sam.
>
> _________________________________________________________________
> All the action. All the drama. Get NCAA hoops coverage at MSN Sports by
> ESPN. http://msn.espn.go.com/index.html?partnersite=espn
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com <http://shop.groupstudy.com/>
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
        
        _______________________________________________________________________
        Please help support GroupStudy by purchasing your study materials from:
        http://shop.groupstudy.com <http://shop.groupstudy.com/>
        
        Subscription information may be found at:
        http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:35 GMT-3