From: William Chen (kwchen@netvigator.com)
Date: Sun Mar 14 2004 - 21:12:14 GMT-3
Hi John,
I tried the to use both "bandwidth percent" and "bandwidth remaining
percent" in 12.2(15)T7, and it does not work neither.
Therefore, it is either the example in the doc. runs only in some
particular IOS version, or it is wrong..
Anyone tried this example and it works? Would you please tell us what is
the IOS version you use?
Best Regards,
William Chen
----- Original Message -----
From: "Marvin Greenlee" <marvingreenlee@yahoo.com>
To: "John Matijevic" <matijevi@bellsouth.net>
Cc: <ccielab@groupstudy.com>
Sent: Monday, March 15, 2004 2:02 AM
Subject: RE: converting custom queue to cbwfq
> Alexei is stating that the document is not good
> because the example given doesn't work on 12.3.6,
> therefore, the 'bandwidth percent' functionality has
> changed yet once again. See the error message:
>
>
> > R1(config-cmap)# class-map match-all P1
> > R1(config-cmap)# match ip precedence 1
> > R1(config)# class-map match-all P2
> > R1(config-cmap)# match ip precedence 2
> > R1(config-cmap)# policy-map myPolicy
> > R1(config-pmap)# class P1
> > R1(config-pmap-c)# bandwidth percent 30
> > R1(config-pmap-c)# class P2
> > R1(config-pmap-c)# bandwidth percent 20
> > R1(config-pmap-c)#bandwidth remaining percent 30
> > All classes with bandwidth should have consistent
> > units
>
> Sincerely,
> Marvin Greenlee, CCIE #12237
> Network Learning, Inc
> Senior Technical Advisor
> marvin@ccbootcamp.com
>
> --- John Matijevic <matijevi@bellsouth.net> wrote:
> > Alexei,
> > I found the document very useful in understanding
> > how the technology
> > works, perhaps you can share with the group, what
> > you found was useful
> > in understanding bandwidth remaining percent, or
> > maybe you can explain
> > why you think the document is no good?
> > Sincerely,
> > John
> >
> > -----Original Message-----
> > From: asadovnikov [mailto:asadovnikov@comcast.net]
> > Sent: Sunday, March 14, 2004 11:21 AM
> > To: 'John Matijevic'; 'William Chen'; 'Brian
> > McGahan';
> > alsontra@hotmail.com
> > Cc: ccielab@groupstudy.com
> > Subject: RE: converting custom queue to cbwfq
> >
> > Does not work on 12.3.6
> >
> > I think documentation referenced earlier is no good.
> > Anybody opened a
> > case
> > with Cisco TAC yet?
> >
> > Best regards,
> > Alexei
> >
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail - More reliable, more storage, less spam
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:25 GMT-3