PBR on a Interface Vlan in a sw3550!!!

From: Sergio Jimenez Arguedas (sejimenez@its.co.cr)
Date: Thu Mar 04 2004 - 18:30:52 GMT-3

• Next message: Adam Asay: "Off Topic Executing Commands with perl script"
• Previous message: Sergio Jimenez Arguedas: "PBR over a Interface VLAN in a SW3550!!!"
• Next in thread: Robert Slaski: "Re: PBR on a Interface Vlan in a sw3550!!!"
• Maybe reply: Robert Slaski: "Re: PBR on a Interface Vlan in a sw3550!!!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi group,

I have the following Scenario

EIGRP 65002

                                        R3
                                          |
                                          | Vlan 7/ Subnet X
R2-----------------------------------SW1-------------------------------------
-------R1-----------|----Subnet Y
                                      Int vlan7

I have been tried to use PBR in the int vlan 7, to pkts from R1. I aplied the
cmd.......ip policy route-map PKT, but It didn4t work!!!

The question is: Can I use PBR in a interface vlan?

I think no!!!

SW1 is:

SW1#sh version
Cisco Internetwork Operating System Software
IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(14)EA1a, RELEASE
SOFTWARE
(fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 02-Sep-03 04:08 by antonino
Image text-base: 0x00003000, data-base: 0x007E660C
ROM: Bootstrap program is C3550 boot loader
SW1 uptime is 4 hours, 24 minutes
System returned to ROM by power-on
System image file is
"flash:/c3550-i5q3l2-mz.121-14.EA1a/c3550-i5q3l2-mz.121-14.
EA1a.bin"
cisco WS-C3550-24 (PowerPC) processor (revision E0) with 65526K/8192K bytes of
m
emory.
Processor board ID CHK0632V17F
Last reset from warm-reset
Bridging software.
Running Layer2/3 Switching Image
Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface
Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface
24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
The password-recovery mechanism is enabled.
384K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0A:B7:02:55:00
Motherboard assembly number: 73-5700-08
Power supply part number: 34-0966-02
Motherboard serial number: CAT063108VJ
Power supply serial number: DCA06320LCU
Model revision number: E0
Motherboard revision number: D0
Model number: WS-C3550-24-EMI
System serial number: CHK0632V17F
Configuration register is 0x10F
FOREST#

Thanks,

Sergio Jimenez A.

• Next message: Adam Asay: "Off Topic Executing Commands with perl script"
• Previous message: Sergio Jimenez Arguedas: "PBR over a Interface VLAN in a SW3550!!!"
• Next in thread: Robert Slaski: "Re: PBR on a Interface Vlan in a sw3550!!!"
• Maybe reply: Robert Slaski: "Re: PBR on a Interface Vlan in a sw3550!!!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:14 GMT-3