From: edgar feliz (ejfeliz65@yahoo.com)
Date: Thu Mar 04 2004 - 11:46:51 GMT-3
I am trying to figure out how to configure unicast/MBGP traffic on one link and Multicast/MBGP traffic on another link with two routers that are connected via two serial line. Using the new MBGP commands. IOS 12.2.13.T8
R1-------Unicast---------R2 ip address 172.16.35.0/30
R1-------Multicast-------R2 ip address 172.16.35.4/30
Current BGP config
!
router bgp 1
no synchronization
bgp log-neighbor-changes
neighbor 172.16.35.2 remote-as 2
neighbor 172.16.35.2 password 7 04590C1618285846282A545140
no auto-summary
!
address-family ipv4 multicast
neighbor 172.16.35.2 activate
no auto-summary
exit-address-family
--More--
Edgar J. Feliz
CCIE # 6898
System Engineer
Work Tel: 732-420-6131
Mobile: 908-910-8438
Email: ejfeliz65@yahoo.com
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:14 GMT-3