RE: Boot from tftp

From: Narayan Gawas (ngawas@cisco.com)
Date: Wed Mar 03 2004 - 21:27:42 GMT-3

Next message: alsontra@hotmail.com: "RE: Tagging routes for redistribution"
Previous message: dhoang4@yahoo.com: "UDP bouncing frame"
Maybe in reply to: Ashok Verma \(ashoverm\): "Boot from tftp"
Next in thread: Narayan Gawas: "RE: Boot from tftp"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

HI jay

Whenever there is some problem at local flash/file,it has to boot from
TFTP.
How can we do this ?

Regards
Narayan

  ------------------------------------------
  NARAYAN GAWAS
  Cisco Technical Assistance Center(CiscoTAC)
   ngawas@cisco.com
-------------------------------------------

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jay Hennigan
Sent: Wednesday, March 03, 2004 3:57 PM
To: Ashok Verma (ashoverm)
Cc: ccielab@groupstudy.com
Subject: Re: Boot from tftp

On Wed, 3 Mar 2004, Ashok Verma (ashoverm) wrote:

> Hi all,
> If I need to boot a router by using the tftp server and I am not
> allowed to use the boot system command. Can we achieve this just by
> changing the config register value.

Do you need to do this once, or have it happen every time at power-up?
The procedures are different.

Hint: You need to know the processor-type name to make it work at
power-up.

-- 
Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net
WestNet:  Connecting you to the planet.  805 884-6323      WB6RDV
NetLojix Communications, Inc.  -  http://www.netlojix.com/

Next message: alsontra@hotmail.com: "RE: Tagging routes for redistribution"
Previous message: dhoang4@yahoo.com: "UDP bouncing frame"
Maybe in reply to: Ashok Verma \(ashoverm\): "Boot from tftp"
Next in thread: Narayan Gawas: "RE: Boot from tftp"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:13 GMT-3