From: Packet Man (ccie2b@hotmail.com)
Date: Tue Mar 02 2004 - 19:48:52 GMT-3
Thanks, Richard. That at least proves the command exists, but why can't I
find it in the command reference. I even did a search of all Cisco.com and
couldn't find it. Am I missing something very stupid (it wouldn't be the
first time)?
If you can find it in the documentation, could you send me the link. Thanks
kindly, PM
>From: Richard Dumoulin <richard.dumoulin@vanco.es>
>To: Packet Man <ccie2b@hotmail.com>, ccielab@groupstudy.com
>Subject: RE: BGP command - show ip bgp dampening parameters
>Date: Tue, 2 Mar 2004 22:40:00 -0000
>
>I tried it on my 1710, see below
>
>BB3#sh ip bgp dampening ?
> dampened-paths Display paths suppressed due to dampening
> flap-statistics Display flap statistics of routes
> parameters Display details of configured dampening parameters
>
>BB3#sh ip bgp dampening param
>BB3#sh ip bgp dampening parameters ?
> | Output modifiers
> <cr>
>
>BB3#sh ip bgp dampening parameters
>% dampening not enabled.
>BB3#sh ver
>Cisco Internetwork Operating System Software
>IOS (tm) C1700 Software (C1700-SY-M), Version 12.2(11)T8, RELEASE SOFTWARE
>(fc1)
>TAC Support: http://www.cisco.com/tac
>Copyright (c) 1986-2003 by cisco Systems, Inc.
>Compiled Sat 29-Mar-03 16:01 by hqluong
>Image text-base: 0x80008124, data-base: 0x80A945C8
>
>ROM: System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
>
>BB3 uptime is 1 week, 6 days, 10 hours, 14 minutes
>System returned to ROM by reload at 20:50:58 UTC Tue Mar 9 1993
>System restarted at 00:00:01 UTC Mon Mar 1 1993
>System image file is "flash:c1700-sy-mz.122-11.T8.bin"
>
>cisco 1721 (MPC860P) processor (revision 0x100) with 29492K/3276K bytes of
>memory.
>Processor board ID FOC07090ARM (3554403555), with hardware revision 0000
>MPC860P processor: part number 5, mask 2
>Bridging software.
>X.25 software, Version 3.0.0.
>1 Ethernet/IEEE 802.3 interface(s)
>1 FastEthernet/IEEE 802.3 interface(s)
>32K bytes of non-volatile configuration memory.
>16384K bytes of processor board System flash (Read/Write)
>
>Configuration register is 0x2102
>
>--Richard
>
>-----Mensaje original-----
>De: Packet Man [mailto:ccie2b@hotmail.com]
>Enviado el: martes, 02 de marzo de 2004 23:24
>Para: ccielab@groupstudy.com
>Asunto: BGP command - show ip bgp dampening parameters
>
>
>Hi group.
>
>In Solie's Practical Studies vol II, on page 820, he shows an example of
>the
>
>above command. I tried to find it in the command reference since it seems
>to not be available on my 2500 routers running 12.2 (d).
>
>I expected I would find that the command didn't appear until 12.3 or wasn't
>available on the 2500 platform. However, I didn't find it at all using the
>command lookup tool.
>
>Any ideas?
>
>Thanks, PM
>
>_________________________________________________________________
>Find things fast with the new MSN Toolbar includes FREE pop-up blocking!
>http://clk.atdmt.com/AVE/go/onm00200414ave/direct/01/
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:13 GMT-3