From: Richard Dumoulin (richard.dumoulin@vanco.es)
Date: Tue Mar 02 2004 - 11:24:34 GMT-3
In past releases, the switchport broadcast interface configuration command
was used to set the broadcast suppression level on the interface. This
command is replaced by the storm-control broadcast interface configuration
command.
Taken from here
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12119ea1/3550cr/cl
i2.htm#2422768
--Richard
-----Mensaje original-----
De: Ashok Verma (ashoverm) [mailto:ashoverm@cisco.com]
Enviado el: martes, 02 de marzo de 2004 15:20
Para: ccielab@groupstudy.com
Asunto: 3550 question
Hi all,
A confusion about the "storm-control broadcast " and "switchport
broadcast "
Both of the command can be used to suppress the broadcast then what is
the difference and in what situation we should use them.
Thanx in advance.
Ashok Kumar Verma
CCIP,CCDP,CCNP
Network Consulting Engineer
Customer Advocacy Advanced Service Dep.
Service Provider AS Div.2
Cisco Systems, K.K.Japan.
Tel: +81-3-5324-4583
e-mail: ashoverm@cisco.com
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:12 GMT-3