From: David Hurtado (dei2viccie@hotmail.com)
Date: Tue Mar 02 2004 - 08:31:24 GMT-3
Hello Ahmed,
You can disable FR Inverse-ARP in a DLCI basis. So disable FR inverse-ARP
for the DLCIs of the first multipoint subinterface, allowing FR Inverse-ARP
for the DLCIs of the second multipoint interface.
The command is as follows:
no frame-relay inverse-arp [protocol] dlci
in the interface configuration mode.
If i'm wrong i hope somebody wil correct me.
>From: "Ahmed Mustafa" <ahmed.mustafa@sbcglobal.net>
>Reply-To: "Ahmed Mustafa" <ahmed.mustafa@sbcglobal.net>
>To: <ccielab@groupstudy.com>
>Subject: Frame-Relay Inverse-Arp
>Date: Mon, 1 Mar 2004 21:48:37 -0800
>
> Can the command "No Frame-relay Inverse-Arp" be applied on a
>sub-interface
>or has to be a physical interface.
>
>If there is a case where Hub router has a multipoint interface to spoke 1
>and
>spoke 2, and another multipoint interface to spoke 3. The scenerio
>requires
>that dynamic frame-relay must be disabled on first multipoint interface,
>and
>not on second one.
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:12 GMT-3