From: MADMAN (dmadlan@qwest.com)
Date: Fri Feb 27 2004 - 13:00:13 GMT-3
Packet Man wrote:
> Both sides and if you're using dialer interfaces, don't forget to
> configure it on both the dialer and the BRI's.
If you must use a dialer you don't need the multilink command on the BRI.
Dave
>
>
>> From: "David Hurtado" <deivi78@hotmail.com>
>> Reply-To: "David Hurtado" <deivi78@hotmail.com>
>> To: ccielab@groupstudy.com
>> Subject: Where to configure PPP Multilink?
>> Date: Fri, 27 Feb 2004 09:12:24 +0000
>>
>> Hello everybody, I'm realyly confused about where to apply PP multilink:
>> it must be configured on one side or in both sides? Thanks for the help
>>
>> ------------------------------------------------------------------------
>>
>> Dale rienda suelta a tu tiempo libre. Encuentra mil ideas para exprimir
>> tu ocio con MSN Entretenimiento
>>
>> _______________________________________________________________________
>> Please help support GroupStudy by purchasing your study materials from:
>> http://shop.groupstudy.com
>>
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> _________________________________________________________________
> Click, drag and drop. My MSN is the simple way to design your homepage.
> http://click.atdmt.com/AVE/go/onm00200364ave/direct/01/
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Emotion should reflect reason not guide it"
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:59 GMT-3