From: AZIZI Mounir (mounir.azizi@cegetel.fr)
Date: Wed Feb 25 2004 - 10:15:59 GMT-3
Hi all,
Danny, I have upgraded my router to 12.2(23) and it works:
(config-if)#frame-relay route 211 interface ?
Serial Serial
Tunnel Tunnel interface
Regards,
Mounir
-----Message d'origine-----
De: Danny.Andaluz@triaton-na.com [mailto:Danny.Andaluz@triaton-na.com]
Date: vendredi 20 fivrier 2004 20:55
@: marvingreenlee@yahoo.com
Cc: ccielab@groupstudy.com
Objet: RE: compound F/R switch
Then this is pretty weird. I basically copy pasted what was on the
internetwork expert site. Perhaps something is missing in their example?
I'll look online for more info.
Thanks, Marvin
Danny
Here's what I get when I try to point to the tunnel 0 with my frame route
statement:
frs(config)#int s0
frs(config-if)#interface Serial1
frs(config-if)# description To R3
frs(config-if)# no ip address
frs(config-if)# encapsulation frame-relay
frs(config-if)# clockrate 4000000
frs(config-if)# frame-relay intf-type dce
frs(config-if)# frame-relay route 302 interface Serial0 203
frs(config-if)# frame-relay route 312 interface Serial0 213
frs(config-if)# frame-relay route 322 interface ?
Serial Serial
frs(config-if)# frame-relay route 312 interface
frs#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-I-L), Version 12.1(22b), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 11-Feb-04 21:43 by cmong
Image text-base: 0x03041FE4, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE
SOFTWARE (fc1)
frs uptime is 40 minutes
System returned to ROM by reload
System image file is "flash:/c2500-i-l.121-22b.bin"
cisco 2500 (68030) processor (revision N) with 6144K/2048K bytes of memory.
Processor board ID 07148664, with hardware revision 00000001
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
frs#
-----Original Message-----
From: Marvin Greenlee [mailto:marvingreenlee@yahoo.com]
Sent: Friday, February 20, 2004 2:37 PM
To: Andaluz, Danilo, Triaton/NA
Cc: ccielab@groupstudy.com
Subject: Re: compound F/R switch
Your IOS just has to support frame-relay switching and
tunnels. I believe the first example I saw for this
was with 11.3 IOS. You can also do it over an
ethernet/token port instead of AUX.
Sincerely,
Marvin Greenlee, CCIE #12237
Senior Technical Advisor
Network Learning, Inc.
--- Danny.Andaluz@triaton-na.com wrote:
> Does anyone know if this requires any special IOS?
>
>
http://www.internetworkexpert.com/resources/compound.frame-relay.htm
>
<http://www.internetworkexpert.com/resources/compound.frame-relay.htm>
>
>
> Thanks,
> Danny
>
>
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:56 GMT-3