MQC for bandwidth reservation

From: alsontra@hotmail.com
Date: Wed Feb 25 2004 - 07:01:04 GMT-3

• Next message: Casey, Paul (6822): "mac- and ip filtering question."
• Previous message: Tom Lijnse: "RE: Traffic Generator in Real Lab"
• Next in thread: HP-France,ex2: "RE: MQC for bandwidth reservation"
• Maybe reply: HP-France,ex2: "RE: MQC for bandwidth reservation"
• Maybe reply: alsontra@hotmail.com: "Re: MQC for bandwidth reservation"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

When is the interface level bandwidth command used or needed with MQC?

For example:

class-map match-all ICMP
  match access-group 101

policy-map ICMP_BW
  class ICMP
    bandwidth 128

interface fa1/0/0
   bandwidth 1500 <-----------------------------When does this need to be
specified?
     service-policy output ICMP_BW

If I don't specify this, what value dose the interface policy use? The
interface bandwidth rate? And if so why would I want to change it?

Alsontra

• Next message: Casey, Paul (6822): "mac- and ip filtering question."
• Previous message: Tom Lijnse: "RE: Traffic Generator in Real Lab"
• Next in thread: HP-France,ex2: "RE: MQC for bandwidth reservation"
• Maybe reply: HP-France,ex2: "RE: MQC for bandwidth reservation"
• Maybe reply: alsontra@hotmail.com: "Re: MQC for bandwidth reservation"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:56 GMT-3