From: Michael Snyder (msnyder@revolutioncomputer.com)
Date: Sun Feb 22 2004 - 23:34:43 GMT-3
(Tftp/dhcp server)---(Router)---(unconfigured router)
I'm thinking I only need two commands.
1) ip helper address a.b.c.d (pointing to the tftp server from the
nearest interface of the new router)
2) ip host newrouter u.x.y.z (the ip address the unconfigured
routed will get after it loads the config)
I know there's a lot more too it. I've read the link below more that
once. The scope of my question is what do I have to do in the lab,
assuming some end station will provide the needed services; on the
transit router.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_configur
ation_guide_chapter09186a00800ca667.html
Thanks for Your Time,
Michael
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:55 GMT-3