From: Scott, Tyson C (tyson.scott@hp.com)
Date: Fri Feb 20 2004 - 17:13:45 GMT-3
The difference is in who is originating the bgp session. If the remote
initiated the session then you need the statement permit tcp any eq bgp
any
If the local router initiated it you will need permit tcp any any eq
bgp. Do show ip bgp n and it will show the ports
Regards,
Tyson Scott
Agilent Problem Management Team
Managed Network Services
Phone: 313-583-5812
Pager: 877-997-0811
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
alsontra@hotmail.com
Sent: Friday, February 20, 2004 5:09 PM
To: ccielab@groupstudy.com
Subject: ACL?
Hi Group,
What is the difference between the following two statements
permit tcp any any bgp <-------any host to any host using bgp
and
permit tcp any eq bgp any <-------any host using bgp to any host
The if used in conjunction isn't the first statement redundant? Or do
you need
both. These statement occur in an inbound access-list.
Alsontra
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:51 GMT-3