From: Zack Damen (zack@supertux.com)
Date: Thu Feb 19 2004 - 22:28:10 GMT-3
Thanks,
You where right.
zd
At 05:16 PM 2/19/2004, Zack Damen wrote:
>This is the response I always get switch:
>
>Command rejected (Port-channel5): Either port is L2 and port-channel is
>L3, or vice-versa
>
>
>
>
>At 05:03 PM 2/19/2004, changkoo Lee wrote:
>>Hi...
>>For creating L3 etherchannel , all interface including physical and
>>logical interface.
>>It means the physical interfaces don't need to be assigned to some vlans
>>since
>>it is L3 interface.
>>Here is the example config.
>>
>>int port-channel 2
>>no switchport
>>ip address 10.0.0.1 255.255.255.252
>>no sh
>>
>>int range fas 0/22 - 23
>>no switchport
>>no ip address
>>channel-group 2 mode on
>>no sh
>>
>>Thanks
>>
>>
>>----- Original Message -----
>>From: "Nidahl Damen" <nidahl@supertux.com>
>>To: <ccielab@groupstudy.com>
>>Sent: Friday, February 20, 2004 9:46 AM
>>Subject: Etherchannel layer 3
>>
>>
>> > Hi Group,
>> >
>> > I was wondering if it is possible to create a layer 3 ethernet channel
>> > bewteen 2 3550. I thought found the correct documentation for creating
>> > this link, bewteen my real switch tells me "Command rejected
>> > (Port-channel2): Either port is L2 and port-channel is L3, or vice-versa".
>> >
>> > cisco documentation:
>> > "
>> >
>> http://www.cisco.com/en/US/partner/products/hw/switches/ps646/products_configuration_guide_chapter09186a008007e72d.html#xtocid531912
>> > "
>> >
>> > I sure this can be done, and that I missing something so here are the
>> > configs, maybe someone can tell me what I am doing wrong.
>> >
>> > s2:
>> >
>> > interface Port-channel2
>> > no switchport
>> > ip address 10.0.0.1 255.255.255.252
>> > !
>> > interface FastEthernet0/22
>> > switchport access vlan 10
>> > switchport mode access
>> > no ip address
>> > !
>> > interface FastEthernet0/23
>> > switchport access vlan 10
>> > switchport mode access
>> > no ip address
>> > !
>> > s2(config-if)#channel-group 2 mode on
>> > Command rejected (Port-channel2): Either port is L2 and port-channel is
>> > L3, or vice-versa
>> >
>> > s1:
>> >
>> > interface Port-channel2
>> > no switchport
>> > ip address 10.0.0.2 255.255.255.252
>> > !
>> > interface FastEthernet0/22
>> > switchport access vlan 10
>> > switchport mode access
>> > no ip address
>> > !
>> > interface FastEthernet0/23
>> > switchport access vlan 10
>> > switchport mode access
>> > no ip address
>> > !
>> > s1(config-if)#channel-group 2 mode on
>> > Command rejected (Port-channel2): Either port is L2 and port-channel is
>> > L3, or vice-versa
>> >
>> > _______________________________________________________________________
>> > Please help support GroupStudy by purchasing your study materials from:
>> > http://shop.groupstudy.com
>> >
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>_______________________________________________________________________
>>Please help support GroupStudy by purchasing your study materials from:
>>http://shop.groupstudy.com
>>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:51 GMT-3