From: Zack Damen (zack@supertux.com)
Date: Thu Feb 19 2004 - 21:51:30 GMT-3
At 04:46 PM 2/19/2004, you wrote:
>Hi,
>
>You have tried to post to GroupStudy.com's CCIELab mailing list. Because the
>server does not recognize you as a confirmed poster, you will be required to
>authenticate that you are using a valid e-mail address and are not a
>spammer.
>
>PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS EMAIL
>YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE POSTED.
>
>By confirming this e-mail you certify that you understand the following:
>
>1. The message does NOT break Cisco's Non-Disclosure requirements.
>
>2. The message is NOT designed to advertise a commercial product.
>
>3. All postings become property of GroupStudy.com
>
>4. You have searched the archives prior to posting.
>
>5. The message is NOT inflammatory.
>
>6. The message is NOT a test message.
>
>To confirm, simply reply to this message. No editing is necessary. Once
>confirmed, you will be able to post without additional confirmations.
>
>
>Welcome to GroupStudy.com!
>
>
>------ORIGINAL MESSAGE---------
>
> >From nidahl@supertux.com Fri Feb 20 00:46:48 2004
>Received: from supertux.com (tux.deltacollege.edu [207.62.178.200])
> by groupstudy.com (8.12.10/8.12.10) with ESMTP id i1K0kmbM007967
> GroupStudy Mailer; Fri, 20 Feb 2004 00:46:48 GMT
>Received: (from apache@localhost)
> by supertux.com (8.11.6/8.11.6) id i1K0khu05270;
> Thu, 19 Feb 2004 16:46:43 -0800
>Received: from 166.50.135.190
> (SquirrelMail authenticated user zack)
> by supertux.com with HTTP;
> Thu, 19 Feb 2004 16:46:43 -0800 (PST)
>Message-ID: <1894.166.50.135.190.1077238003.squirrel@supertux.com>
>Date: Thu, 19 Feb 2004 16:46:43 -0800 (PST)
>Subject: Etherchannel layer 3
>From: "Nidahl Damen" <nidahl@supertux.com>
>To: ccielab@groupstudy.com
>Reply-To: nidahl@supertux.com
>User-Agent: SquirrelMail/1.4.1
>MIME-Version: 1.0
>Content-Type: text/plain;charset=iso-8859-1
>Content-Transfer-Encoding: 8bit
>
>Hi Group,
>
>I was wondering if it is possible to create a layer 3 ethernet channel
>bewteen 2 3550. I thought found the correct documentation for creating
>this link, bewteen my real switch tells me "Command rejected
>(Port-channel2): Either port is L2 and port-channel is L3, or vice-versa".
>
>cisco documentation:
>"
>http://www.cisco.com/en/US/partner/products/hw/switches/ps646/products_configuration_guide_chapter09186a008007e72d.html#xtocid531912
>"
>
>I sure this can be done, and that I missing something so here are the
>configs, maybe someone can tell me what I am doing wrong.
>
>s2:
>
>interface Port-channel2
> no switchport
> ip address 10.0.0.1 255.255.255.252
>!
>interface FastEthernet0/22
> switchport access vlan 10
> switchport mode access
> no ip address
>!
>interface FastEthernet0/23
> switchport access vlan 10
> switchport mode access
> no ip address
>!
>s2(config-if)#channel-group 2 mode on
>Command rejected (Port-channel2): Either port is L2 and port-channel is
>L3, or vice-versa
>
>s1:
>
>interface Port-channel2
> no switchport
> ip address 10.0.0.2 255.255.255.252
>!
>interface FastEthernet0/22
> switchport access vlan 10
> switchport mode access
> no ip address
>!
>interface FastEthernet0/23
> switchport access vlan 10
> switchport mode access
> no ip address
>!
>s1(config-if)#channel-group 2 mode on
>Command rejected (Port-channel2): Either port is L2 and port-channel is
>L3, or vice-versa
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:51 GMT-3