From: edgar feliz (ejfeliz65@yahoo.com)
Date: Tue Feb 17 2004 - 12:10:39 GMT-3
Has anyone gotten ISIS to work over Frame-Relay configured on the main interface with map statements. here is the hub router config. I have three spokes my looback are seen by the hub router but the spokes don't see the loopbacks of the other spokes only the hubs.
I should see 192.168.1.1 and 192.168.2.2 on the sh ip route of router r4 but as you'll see below it is not working.
interface Serial0/0
ip address 150.50.100.3 255.255.255.248
ip router isis
ip pim nbma-mode
ip pim sparse-mode
encapsulation frame-relay
ip igmp join-group 224.0.1.40
no fair-queue
clockrate 256000
isis priority 127
frame-relay map clns 402 broadcast
frame-relay map clns 406 broadcast
frame-relay map clns 403 broadcast
frame-relay map ip 150.50.100.1 402 broadcast
frame-relay map ip 150.50.100.2 403 broadcast
frame-relay map ip 150.50.100.4 406 broadcast
frame-relay lmi-type cisco
Sh ip route os one spoke..................................
117.0.0.0/24 is subnetted, 1 subnets
S 117.17.17.0 is directly connected, Null0
116.0.0.0/24 is subnetted, 1 subnets
S 116.16.16.0 is directly connected, Null0
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
i L1 172.16.136.0/26 [115/20] via 150.50.100.3, Serial0/0
i L1 172.16.35.0/30 [115/20] via 150.50.100.3, Serial0/0
192.168.4.0/32 is subnetted, 1 subnets
C 192.168.4.4 is directly connected, Loopback0
192.168.5.0/32 is subnetted, 1 subnets
i L1 192.168.5.5 [115/30] via 150.50.100.3, Serial0/0
13.0.0.0/24 is subnetted, 1 subnets
B 13.13.13.0 [200/0] via 192.168.3.3, 00:10:12
14.0.0.0/24 is subnetted, 1 subnets
B 14.14.14.0 [200/0] via 192.168.3.3, 00:10:13
150.50.0.0/29 is subnetted, 1 subnets
C 150.50.100.0 is directly connected, Serial0/0
192.168.3.0/32 is subnetted, 1 subnets
i L1 192.168.3.3 [115/20] via 150.50.100.3, Serial0/0
r43620#
Thanks Edgar
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:50 GMT-3