From: Jonathan Hays (nomad@gfoyle.org)
Date: Tue Mar 16 2004 - 09:05:14 GMT-3
According to Cisco, "Fast-Sequenced Transport (FST) encapsulation is
supported over almost every type of LAN or WAN."
http://www.cisco.com/warp/public/100/trb_rif.html
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>Behalf Of Yasser Abdullah
>Sent: Monday, February 16, 2004 3:55 AM
>To: 'Pun, Alec CL'; ccielab@groupstudy.com
>Subject: RE: DLSW FST encapsulation
>
>
>FST works on Token rings only.
>
>Yasser
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Pun, Alec CL
>Sent: Monday, February 16, 2004 6:36 AM
>To: Michael Snyder; ccielab@groupstudy.com
>Cc: 'asadovnikov'
>Subject: DLSW FST encapsulation
>
>Have anyone tried to use FST on Ethernet ? I just setup two routers
>running
>FST encapsulation back-to-back but it did not bridge ethernet packets
>thru..... Peers are up but when I try to ping from PC-A to PC-B, no
>packets
>received. Any help is appreciated.
>
>PC-A ----- 1710A ----- DLSW (FST) -------- 1710B --------- PC-B
>
>1710A & B configuration is similar
>
>bridge irb
>bridge 1 protocol ieee
>dlsw local-peer peeri-d 1.1.1.1
>dlsw remote-peer 0 fst 1.1.1.2
>dlsw bridge 1
>
>int e1
> ip addr 1.1.1.1
>!
>int e0
> description To_PC
> no ip addr
> bridge-group 1
>!
>
>rgds,
>alec
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:50 GMT-3