From: William Chen (kwchen@netvigator.com)
Date: Sun Feb 08 2004 - 21:16:27 GMT-3
Hi,
Just want to add a command to the map-class.
You may have to add the command "frame-relay voice bandwidth" to reserve
the bandwidth from voice call, otherwise the VoFR will not work.
Best Regards,
William Chen
----- Original Message -----
From: "Michael Snyder" <msnyder@revolutioncomputer.com>
To: <ccielab@groupstudy.com>
Sent: Monday, February 09, 2004 5:11 AM
Subject: Quick question on Voip over Frame.
> Using the requirements for Voip
>
> Port Speed 64000
> CIR 32000
> Tc 10 ms
>
>
> map-class frame-relay voip
> frame-relay cir 32000
> frame-relay bc 320
> frame-relay be 0
> frame-relay mincir 32000
> no frame-relay adaptive-shaping
> frame-relay fragment 320
>
>
> fragment type end-to-end fragment size 320
> cir 32000 bc 320 be 0 limit 40 interval 10
> mincir 32000 byte increment 40 BECN response no
> frags 22 bytes 1561 frags delayed 17 bytes delayed
> 1201
>
>
> 1) Will the fragment size always equal Bc?
>
> 2) Should I use the `frame-relay ip rtp priority 16384 16383 32` with my
> class or add my own priority queue to the physical interface?
>
> There's no firm requirements, just trying to figure out a good way of
> doing it.
>
> http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a
> 00800d6788.shtml
>
>
> Michael Snyder
> Lead Network Engineer
> CCNP/DP, CSS1, MCSE NT/2000
> Revolution Computer Systems
> (270) 443-7400
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:47 GMT-3