From: wwwjjang@chol.com
Date: Tue Feb 03 2004 - 23:30:27 GMT-3
HI..
I'm testing the Static RP in Frame-Relay Topology..
But There is a Problem..What's the reason ?? Help me...
-------------
Test Diagram
-------------
e0--R1-(s0)---F/R--(s0.2)-R2-(s0.1)--F/R--(s0)-R3-(e0)
------------
My config
-------------
-I made 3-IGMP Join-Groups, 224.0.0.1,224.0.0.2 & 224.0.0.3 in E0 of R1
-I configured PIM-Sparse Mode every interfaces of all routers
-I made a R3's S0(23.23.23.23) to be a Static RP
------------
Question !!
------------
I want to configure RP-Fltering on R1 & R2 like below
----------
R1 & R2
----------
ip pim rp-address 23.23.23.23 20 **
!
access-list 20 permit 224.0.0.1 **
access-list 20 permit 224.0.0.2 **
==>R1 & R2 can ping to the 224.0.0.1 ~ 3.
But after configuring this, R3 cannot ping to the 224.0.0.3 !!!
What's the reason ???
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:45 GMT-3