From: Chris (clarson52@comcast.net)
Date: Tue Feb 03 2004 - 15:21:21 GMT-3
It is not a rule but it makes things much easier:
A reboot will not change the router-id (as you add loopbacks with highr
IP's)
Making Virtual link connections is easy. (area 5 virtual-link 2.2.2.2 blah
blah) otherwise you have to check neighbors, and that address can/will
change as you add loopbacks or addresses.
----- Original Message -----
From: "Rahul Barua" <rahulbarua@touchtelindia.net>
To: <ccielab@groupstudy.com>
Sent: Tuesday, February 03, 2004 10:06 AM
Subject: ospf router id
> Dear Sameer,
>
> wat could be the purpouse of havin a 0.0.0.0 router id ,
> Is the router id supported on all ios coz i have seen in my lab sometimes
,
> some router 25xx dont take the command , or if router id is elected ????,
> router-id will change only on reboot ??? ,
> Is it a rule to elect router-id before puttin any n/w under ospf ...
>
> Regards
>
> Rahul Barua .
>
> " Do,Or do not.There is no try . " - Yoda .
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:45 GMT-3