From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon Feb 02 2004 - 14:54:02 GMT-3
Their switch most likely does not have a static route for your NSAP.
As a general best practice you should enable ilmi when doing SVC
configurations, as you may not know what the directly connected ATM switch
is doing. See the following doc for more info:
http://www.cisco.com/en/US/tech/tk39/tk371/technologies_configuration_exampl
e09186a0080094b3d.shtml
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 708-362-1418 (Outside the US and Canada)
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Richard Davidson
> Sent: Saturday, January 31, 2004 12:52 PM
> To: groupstudy
> Subject: atm svc with no ilmi
>
> I am using the bradshaw rack to compinsate my lack of
> atm in my home rack. I have goton atm svc with no
> ilmi to work on the ccbootcamp rack but for some
> reason cant get it to work on the bradshaw rack.
> Would anyone mind telling me if I am missing
> something. One more thing. Is the ESI programed on
> the atm switch or can use any number you want to use?
> Thanks
> Rich
>
> R6
> interface ATM0
> ip address 198.1.1.1 255.255.255.0
> pvc 0/5 qsaal
> !
> !
> svc nsap 47.00918100000000E01E5F4701.111114141414.00
> protocol ip 198.1.1.6 broadcast
> !
> atm nsap-address
> 47.00918100000000E01E5F4701.111113131313.00
> no atm ilmi-keepalive
> !
>
>
> =====
> Richard Davidson
> Yahoo IM: r1davidson
> e-mail rich@myhomemail.net
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:45 GMT-3