RE: VoIP phone enquiry

From: rnasr (rnasr@s2n.com.au)
Date: Sun Feb 01 2004 - 04:47:59 GMT-3

Next message: Tom Young: "queue-list for frame-relay"
Previous message: Brian McGahan: "RE: AS-Path Filtering with BGP Confiderations!"
Maybe in reply to: lg01: "RE: VoIP phone enquiry"
Next in thread: Scott Morris: "RE: VoIP phone enquiry"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Laides and gents,

Is there a good tutorial out there on call manager.

Thanks,
jnasr.

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
asadovnikov
Sent: Monday, February 02, 2004 4:05 PM
To: lg01@myway.com
Cc: ccielab@groupstudy.com
Subject: RE: VoIP phone enquiry

Well, at some point VoIP need to connect to PSTN, or else how a call would
ever go through from IP to traditional telephony?

IP phones do not need PSTN connection to call each other, but to call
traditional phones PSTN connection is needed.

At some point in the future more and more phones will use IP telephony and
the need for PSTN connectivity will decline.

Even now, say you have a small business with 2 offices... You can set up 2
CME, one in each office and say 50 IP phones in each. Then you have 100
phones which can call each other with no traditional telephony involved.
But you still going to need a PSTN connection in at least one office so you
can place and receive public calls.

Best regards,
Alexei

-----Original Message-----
From: lg01 [mailto:lg01@myway.com]
Sent: Sunday, February 01, 2004 9:58 PM
To: asadovnikov@comcast.net
Cc: ccielab@groupstudy.com
Subject: RE: VoIP phone enquiry

Hi asadovnikov,

But if I need a PSTN line to connect into my 2620, then what's the point of
all these since I would need to pay for my PSTN line anyway, isn't it?

Why bother to set up all these to go thru the CME?

I was hoping that there will be a solution that I could just use my Cisco IP
Phone via the IP, without any need of the PSTN (normal phone line).

Cheers,

--- On Sun 02/01, asadovnikov < asadovnikov@comcast.net > wrote:

From: asadovnikov [mailto: asadovnikov@comcast.net]

To: lg01@myway.com

Cc: ccielab@groupstudy.com

Date: Sun, 1 Feb 2004 21:33:55 -0500

Subject: RE: VoIP phone enquiry

You need a better router then 2620 to run latest 12.3T features but
older software you shall be fine with, I recommend 2621XM. Yes
your PSTN line would go right into 2620 (you need some kind of voice card
though). I have voice PRI coming into the router, depending
upon hardware you have PSTN connection would be different. If you have
FXO port you can plug your home phone line into the router. Best
regards, Alexei -----Original Message----- From: lg01
[mailto:lg01@myway.com] Sent: Sunday, February 01, 2004 9:01 PM To:
asadovnikov@comcast.net Cc: ccielab@groupstudy.com Subject: RE: VoIP
phone enquiry Hi asadovnikov, Thanks for
that. I did a quick read but I still have the following
questions. i) I only have a cisco 2620, will that
work? ii) What do you mean by the PSTN line? Will the PSTN
line needs to go straight into the 2620? If you can
elaborate a bit more, that's
great!!! Cheers, Hunt --- On Sun 02/01, asadovnikov < asadovnikov@comcast.net >
wrote: From: asadovnikov [mailto: asadovnikov@comcast.net] To:
lg01@myway.com Cc: ccielab@groupstudy.com Date: Sun, 1
Feb 2004 20:47:49 -0500 Subject: RE: VoIP phone
enquiry Yes you can change your phone to Cisco IP phone. It
is real easy
to setup. http://www.cisco.com/univercd/cc/td/doc/product/access/ip_ph
/ip_ks /index.htm Let me know if specific questions. Now, you
will need PSTN/PBX link so you can place/receive traditional
calls, and you will need Unity or something for voice mail if desired.
As well CME was never meant to scale up all that much. I just
brought up CME installation a month ago and so far very happy
with it. Best regards, Alexei -----Original
Message----- From: nobody@groupstudy.com
[mailto:nobody@groupstudy.com] On Behalf Of lg01 Sent: Sunday,
February 01, 2004 8:30 PM To:
swm@emanon.com Cc: ccielab@groupstudy.com Subject: RE: VoIP phone
enquiry Hi Scott, I have read your URL, thanks for
that!!! What I'm curious is that with this ITS, can I allow my
IPPhone to talk to the outside world? i.e. would I be able to
substitute my home phone with this Cisco IP Phone, so my friend can
still call me as per normal? If you have any instructions to set
this up, it would
be greatly appreciated. Cheers, L. ---
On Fri 01/30, Scott Morris < swm@emanon.com > wrote: From: Scott
Morris [mailto: swm@emanon.com] To: lg01@myway.com,
ccielab@groupstudy.com Date: Fri, 30 Jan 2004 23:45:11
-0500 Subject: RE: VoIP phone enquiry You can run ITS (IOS
Telephony Services), or now called Call Managed Express on a
sufficiently configured router to control your
IP Phone. Otherwise, yes, you will need a Call Manager
server setup. For more
information, check out: http://www.cisco.com/en/US/tech/tk652/tk701
/technologies_co nfigurati on_example09186a00800ffdcc.shtml HTH
, Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service
Provider) #4713, CISSP, JNCIS, et al. IPExpert CCIE Program
Manager IPExpert
Sr. Technical Instructor swm@emanon.com/smorris@ipexpert.net htt
p://www .ipexpert.net -----Original
Message----- From: nobody@groupstudy.com [mailto:nobody@groupstudy.
com] On Behalf Of lg01 Sent: Friday, January 30, 2004 11:26
PM To: ccielab@groupstudy.com Subject: VoIP
phone enquiry Hi group, I am a newbie to voice so would
need some help. For my Cisco 7960 Series VoIP Phone to work, it
is mandatory to have Cisco ! CallManager? Or can it work without
one? Is there any instructions on how I can
set this up? Thanks, L

Next message: Tom Young: "queue-list for frame-relay"
Previous message: Brian McGahan: "RE: AS-Path Filtering with BGP Confiderations!"
Maybe in reply to: lg01: "RE: VoIP phone enquiry"
Next in thread: Scott Morris: "RE: VoIP phone enquiry"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:45 GMT-3