From: iwan (iwan@i-lusion.nl)
Date: Fri Jan 30 2004 - 13:27:41 GMT-3
Its a static route ...and i tought that static routes where forbidden...
Bye
Iwan Hoogendoorn
-----Original Message-----
From: nettable_walker@comcast.net [mailto:nettable_walker@comcast.net]
Sent: vrijdag 30 januari 2004 16:15
To: iwan
Cc: ccielab@groupstudy.com
Subject: ISDN question
Who says "The CCIE LAB won't permit the static floating route..." ?
Richard
CCIE# 12388
//
> Hi,
>
> I have 2 routers in 1 OSPF area connected with frame relay...
>
> These 2 routers are also connected to ISDN for backup...
>
> This is the task:
> I want to configure ISDN backup for the frame relay connection.
>
> I do NOT want to use:
> - Dialer backup interface command
> - Dialer watch
>
> This leaves me with 2 options
> - Static floating route
> - OSPF demand circuit
>
> My question here is:
> I want to use OSPF demand circuit...
> I know that OSPF demand circuit is mainly used to suppress the hello
> messages from OSPF so that the ISDN link won't come up because of
> that...
>
> What I also want to do is to use the PATH of frame relay, so I need to
> set the route that the ISDN link uses to a higher AD then what frame
> relay uses...
>
> How do I accomplish this?
> The CCIE LAB won't permit the static floating route...
>
> And I am not sure if this is accomplished by defining the demand
circuit
> ONLY.
>
> Iwan Hoogendoorn
>
>
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:52 GMT-3