From: Arvind Yadav (arvindyadav@comcast.net)
Date: Fri Jan 30 2004 - 03:55:34 GMT-3
You don't require any mapping if you are using point-to-point interface. It
requires only in case of physical and Ptm.
----- Original Message -----
From: "Paul Chen" <cpjchen@starhub.net.sg>
To: <ccielab@groupstudy.com>
Sent: Thursday, January 29, 2004 10:43 PM
Subject: Dlsw lite with llc2 encap
> Hi,
>
>
>
> I am trying to configure dlsw lite with llc2 encap over frame, however I
> can't configure the statement 'frame map llc2 dlci ' portion.
>
>
>
> It does allow me to configure it on a ptp interface ? I am running IOS
> version 12.2(13)T9,
>
>
>
> dlsw remote-peer 0 frame-relay interface Serial0/0.1 103
>
>
>
> R1(config)#int s0/0.1
>
> R1(config-subif)#frame map llc2 103
>
> FRAME-RELAY INTERFACE-DLCI command should be used on point-to-point
> interfaces
>
> R1(config-subif)#frame map dl
>
> R1(config-subif)#frame map dlsw 103
>
> FRAME-RELAY INTERFACE-DLCI command should be used on point-to-point
> interfaces
>
>
>
>
>
> Any help appreciated.
>
>
>
> Thanks,
>
> Paul
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:52 GMT-3