RE: Using Key chains

From: Packet Man (ccie2b@hotmail.com)
Date: Fri Jan 30 2004 - 00:19:34 GMT-3

• Next message: Paul Chen: "Dlsw lite with llc2 encap"
• Previous message: kasturi cisco: "RE: Using Key chains"
• Maybe in reply to: Packet Man: "Using Key chains"
• Next in thread: Brian McGahan: "RE: Using Key chains"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

Thanks for getting back to me.

If I understand you correctly then using multiple keys on a key chain is
only for the situation of migrating from one key to another. Is that
correct?

The reason I ask is because the scenario I was thinking about is this:

Assume you have a hub router with p2p connections to 5 spoke stub routers
and you have to use a different password on each link. Therefore, to
fulfill this requirement, the hub router has to have 5 different keys but
the spoke routers only need one key.

According to what you're saying, I would have to configure 5 different KEY
CHAINS each with one key instead of configuring 1 KEY CHAIN with 5 different
keys. Is that correct?

Thanks in advanced

>From: "kasturi cisco" <kasturi_cisco@hotmail.com>
>To: ccie2b@hotmail.com, ccielab@groupstudy.com
>Subject: RE: Using Key chains
>Date: Fri, 30 Jan 2004 02:58:31 +0000
>

• Next message: Paul Chen: "Dlsw lite with llc2 encap"
• Previous message: kasturi cisco: "RE: Using Key chains"
• Maybe in reply to: Packet Man: "Using Key chains"
• Next in thread: Brian McGahan: "RE: Using Key chains"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:52 GMT-3