From: Arvind Yadav (arvindyadav@comcast.net)
Date: Mon Jan 26 2004 - 15:46:52 GMT-3
If you have only one Route Reflector then you really don't need to configure
Cluster ID but if you more then one RR, In this case, all route reflectors
in the cluster must be configured with the cluster ID so that a route
reflector can recognize updates from route reflectors in the same cluster
http://www.cisco.com/en/US/tech/tk365/tk80/technologies_tech_note09186a00800
c95bb.shtml#routereflectors
Arvind
----- Original Message -----
From: "Matt Nabors" <mnabors@bcbsal.org>
To: <ccielab@groupstudy.com>
Sent: Monday, January 26, 2004 1:22 PM
Subject: Cluster ID
> How necessary is a clusterID? Halabi's book dedicated some time to
> using clusterID's when using route reflectors. However, I have never
> seen an example config with a clusterID configured. Please enlighten
> me.
>
> Thanks,
> Matt :)
>
>
>
============================================================================
==
> CONFIDENTIALITY NOTICE
> This e-mail is intended for the sole use of the individual(s) to whom it
is addressed, and may contain information that is privileged, confidential
and exempt from disclosure under applicable law. You are hereby notified
that any dissemination, duplication, or distribution of this transmission by
someone other than the intended addressee or its designated agent is
strictly prohibited. If you receive this e-mail in error, please notify me
immediately by replying to this e-mail.
>
============================================================================
==
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:50 GMT-3