From: Jonathan Hays (nomad@gfoyle.org)
Date: Mon Jan 26 2004 - 01:13:07 GMT-3
you wrote:
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>Behalf Of Nauman Khan
>Sent: Sunday, January 25, 2004 10:33 PM
>To: David Deng; ccielab@groupstudy.com
>Subject: Re: BGP aggregate address summary-only suppress
>aggregated routes
>The only reason that I can think of that you are not seeing
>the aggregate/summary on R2 is b/c your route-map is missing
>seq 20 statement permitting all others that does not match
>access-list 4.
>
>So try adding the following to your config:
>
>route-map setcomlocal permit 20
>
>followed by
>
>clear ip bgp * soft
>
>Let me know how it goes.
>
>Thanks,
>
>Nauman
= = =
Yes! I guess my suggestion of opening up the access-list would work but
I agree that Nauman's answer is a good one.
Jonathan
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:50 GMT-3