From: Bob Sinclair (bsinclair@netmasterclass.net)
Date: Fri Jan 23 2004 - 15:00:12 GMT-3
Those commands are valid - the 3550 will accept them - but only queries from
the router are destined to this address. IGMP membership reports from
clients (joins) use the group they want to join as the destination address.
HTH,
Bob Sinclair
CCIE #10427, CISSP, MCSE
www.netmasterclass.net
----- Original Message -----
From: <wwwjjang@chol.com>
To: <ccielab@groupstudy.com>
Sent: Friday, January 23, 2004 12:31 PM
Subject: How Can i drop the IGMP join message ??
> What's the command to drop the 224.0.0.1 IGMP join message that
> goes into the cat3550's fastethernet interface ???
>
> => My configuration is like below
> Is this correct ????
>
> ip igmp profile 40
> deny
> range 224.0.0.1 224.0.0.1
> !
> interface FastEthernet0/20
> ip igmp filter 40
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:49 GMT-3