From: alsontra@hotmail.com
Date: Wed Jan 21 2004 - 19:43:22 GMT-3
ok. Good information. My next question was going to be what command changes
the (tc). I guess the answer is, by using the bc value. One more question,
can you use different (tc) on a several DLCI's on a physical interface?
Thanks,
Alsontra Daniels
> You can not change the Tc value directly. You have change the Bc value to
affect the Tc. To figure out the Bc value use the following formula.
>
> Bc=Tc*CIR
>
> Default 125 ms per Tc
>
> Bc =.125 * 128000 = 16000bps
>
> For 10ms Tc
>
> Bc = .01 * 128000 = 1280bps
>
>
> -----Original Message-----
> From: alsontra@hotmail.com [mailto:alsontra@hotmail.com]
> Sent: Wednesday, January 21, 2004 5:14 PM
> To: ccielab@groupstudy.com
> Subject: Frame-Relay Traffic-Shaping (FRTS)
>
>
> I am having some trouble working out the mathematics involved with a
> particular Frame-Relay traffic shaping exercise. If I start with (CIR) =
> 128000bps and a (bc) =16000 and a (tc)=125ms and then change the (tc)
value to
> 10ms seconds, are the below calculations correct?
>
>
>
> CIR = 128000bps
>
> bc = 1280bps because (1/100) of 128 000 = 1280
>
> tc = 10ms because (1/100) of 1000 = 10
>
>
>
> Any help would be appreciated. Thanks in advance.
>
>
>
> Alsontra Daniels
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:48 GMT-3