From: Bill Lijewski (bill@eccie.com)
Date: Wed Jan 21 2004 - 14:57:44 GMT-3
Does this happen even if you have a blank initial configuration file?
If it's happening when the router boots up and loads the configuration
file from NVRAM you may have accidentally put 'no exec' on the console.
- Bill Lijewski
CCIE#8642
Network Learning Inc
5 Day R&S CCIE Bootcamp Instructor
bill@eccie.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
David Hickman
Sent: Wednesday, January 21, 2004 9:46 AM
To: ccielab@groupstudy.com
Subject: Console Problem on 3620 [bcc][faked-from]
Importance: Low
I have a funny problem on one of my 3620's that I need help with. I can
console to it while it boots and can break into the Rommonitor and all
that
stuff, but as soon as it boots an IOS it locks out the console port.
Then I
can not get anything at any console speed, and my aux port is locked out
too.
Any ideas?
Thanks,
David
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:48 GMT-3