From: Pun, Alec CL (Alec.CL.Pun@pccw.com)
Date: Tue Jan 20 2004 - 11:11:34 GMT-3
poor that I am using PIX 501/506 where that's no dot1q trunking supported.
-----Original Message-----
From: Driessens.Hans [mailto:hans.driessens@siemens.com]
Sent: Tuesday, January 20, 2004 10:03 PM
To: Scott Morris; 'Pun, Alec CL'; ccielab@groupstudy.com
Subject: RE: How to enable one-arm routing in PIX
Hi group
since ver 6.3 you can do trunking and make two logical interface on one
physical interface.... that looks like a onearmed router to me(one-armed
pix)
cheers
hans
-----Oorspronkelijk bericht-----
Van: Scott Morris [mailto:swm@emanon.com]
Verzonden: Tuesday, January 20, 2004 14:49
Aan: 'Pun, Alec CL'; ccielab@groupstudy.com
Onderwerp: RE: How to enable one-arm routing in PIX
Nope. Once it goes into the PIX on one interface it MUST exit via a
different interface. Your PIX is a firewall, not supposed to be a router!
:)
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Pun,
Alec CL
Sent: Tuesday, January 20, 2004 5:31 AM
To: ccielab@groupstudy.com
Subject: OT : How to enable one-arm routing in PIX
Hi group,
Any method to enable one-arm routing in PIX ? It seems PIX by default does
not allow routing in and out using the same interface, e.g. inside. Any way
to bypass this restriction.
rgds,
alec
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:47 GMT-3