Re: Port Trust State on 3550

From: Phil (ciscostudent1@yahoo.com.br)
Date: Mon Jan 19 2004 - 19:07:48 GMT-3

• Next message: csaez: "BGP distribute-list with gateway parameter"
• Previous message: ccie: "RE: route-map tags"
• Maybe in reply to: ccie2be: "Port Trust State on 3550"
• Next in thread: William Chen: "Re: Port Trust State on 3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

That's correct.
Phil

ccie2be <ccie2be@nyc.rr.com> wrote:
Hi all,

According to the 3550 config guide, by default, the trust state of a port is
Not trusted.

http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12119ea1/3550scg/sw
qos.htm#1042819

Does this mean, for example, that if a 3550 port receives a packet with some
qos field (cos, ip prec or dscp) set to a non zero value that it will reset
the value to the default value for the port ( which is, by default = 0 ) ?

Thanks in advanced, dt

• Next message: csaez: "BGP distribute-list with gateway parameter"
• Previous message: ccie: "RE: route-map tags"
• Maybe in reply to: ccie2be: "Port Trust State on 3550"
• Next in thread: William Chen: "Re: Port Trust State on 3550"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:47 GMT-3