From: Tim Fletcher (groupstudy@fletchmail.net)
Date: Mon Jan 19 2004 - 11:31:30 GMT-3
Arvind,
I think this is a good example of over thinking the problem. I would say
your solution answers the question just fine as is. I think the point of
the 2nd part was to have you set up interface tracking, which you've done.
-Tim Fletcher
At 02:52 AM 1/19/2004 -0500, Arvind Yadav wrote:
> R5
> / \
>R2 ----R4
>
>R2 and R4 connected via ethernet and R2-R5 and R5-R4 connected vai FR.
>
>Question :
>Configure fault tolerant b/w R2 and R4 ethernet . Make sure that no packets
>from ethernet are lost when FR link on either of router goes down.
>
>It very clear that HSRP with serial tack needs to configured on R2 and R4.
>What addition configuration required to achieve 2nd part of question. We
>need to change hello and hold timer.
>
>Arvind
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:47 GMT-3