RSVP-Question for RTP-Packet...

From: wwwjjang@chol.com
Date: Sun Jan 18 2004 - 11:04:39 GMT-3

• Next message: Howard C. Berkowitz: "Re: 2 ospf area 0"
• Previous message: Airalgerie123@aol.com: "ISIS default static redistribute"
• Next in thread: Jim Feldman: "RE: RSVP-Question for RTP-Packet..."
• Maybe reply: Jim Feldman: "RE: RSVP-Question for RTP-Packet..."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi..everyone..

How can i configure the RSVP for RTP-packet ??
Who knows the correct method help me please..!!

---------
Diagram>
---------

 R1-(S0.1-MP)----FR(DLCI 102 201)---(S0)--R2
                 FR(DLCI 103 302)---(S0)--R3

-R1's S0.1,R2's S0 & R3's S0 are in the same subnet..

----------
Question>
----------
-On R1's S0 , Configure RSVP for Dlci 102 & 103
-Total reservation for RTP is 300kbps
-Single-flow-kbps is 20Kbps

----------
My Answer **> Is Correct ???
----------
R1>
-----
interface Serial0
 no ip address
 encapsulation frame-relay
 no fair-queue
 frame-relay traffic-shaping ***
 no frame-relay inverse-arp
 frame-relay lmi-type ansi
 !
interface Serial0.1 multipoint
 ip address 100.100.100.1 255.255.255.0
 frame-relay class RSVP **
 frame-relay map ip 100.100.100.2 102 broadcast
 frame-relay map ip 100.100.100.3 103 broadcast
 ip rsvp bandwidth 300 20 **
!
map-class frame-relay RSVP **
 no frame-relay adaptive-shaping
 frame-relay fair-queue **
 
***>The RSVP-config is relevant with all traffic of R1's S0.
    How can i config the RSVP for RTP-Packets ???? ***

• Next message: Howard C. Berkowitz: "Re: 2 ospf area 0"
• Previous message: Airalgerie123@aol.com: "ISIS default static redistribute"
• Next in thread: Jim Feldman: "RE: RSVP-Question for RTP-Packet..."
• Maybe reply: Jim Feldman: "RE: RSVP-Question for RTP-Packet..."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:47 GMT-3