From: C.Sammarcellino@sirtisistemi.it
Date: Sat Jan 17 2004 - 20:18:27 GMT-3
The questions is Block on r1 user from accessing a SAP witch value of 12, i
have found two possible solution what is the best ?
First
-----------------------------------------------------------------------------------------------------------------------------------------------------------
++++++++++++++ R1 ++++++++++++++++++++++++++++
!
dlsw local-peer peer-id 200.0.0.1
dlsw remote-peer 0 tcp 200.0.0.8 lsap-output-list 200
dlsw bridge-group 1
!
interface Loopback0
ip address 200.0.0.1 255.255.255.255
!
access-list 200 deny 0x1212 0x0000
access-list 200 permit 0x0000 0xFFFF
++++++++++++++ R8 ++++++++++++++++++++++++++++
!
dlsw local-peer peer-id 200.0.0.8
dlsw remote-peer 0 tcp 200.0.0.1
dlsw bridge-group 1
!
interface Loopback0
ip address 200.0.0.8 255.255.255.255
!
Second
-----------------------------------------------------------------------------------------------------------------------------------------------------------
++++++++++++++ R1 ++++++++++++++++++++++++++++
!
dlsw local-peer peer-id 200.0.0.1
dlsw remote-peer 0 tcp 200.0.0.8
dlsw icannotreach sap C
dlsw bridge-group 1
!
++++++++++++++ R8 ++++++++++++++++++++++++++++
!
dlsw local-peer peer-id 200.0.0.8
dlsw remote-peer 0 tcp 200.0.0.1
dlsw bridge-group 1
!
Tanks
Ciro
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:47 GMT-3